NavBar Pageset - How to Use Extra Hotspots

juli 27, 2016

1.  Select the topic you wish to edit.

kA1G00000008u7MKAQ_en_US_1_0


2.  Select the Settings button from the Toolbar.  kA1G00000008u7MKAQ_en_US_1_1

kA1G00000008u7MKAQ_en_US_1_2 If the  Toolbar is disabled, select the Modify button at the top right corner of the screen. kA1G00000008u7MKAQ_en_US_1_3 A dialog will open with two options. Select Settings.

3.  Select Page Browser from the Settings menu.

4.  Select the page and choose Editor.

5.  You will see up to four extra hotspots (shaded) along the left side of the page. 

kA1G00000008u7MKAQ_en_US_1_4
 
These will be labeled Subtopic 1, Subtopic 2, etc.  Though they are hidden by default, they will become active once you begin to edit them.Each extra hotspot is linked to a subtopic tab and vocabulary grid with the matching name.
 
6.  To use an empty hotspot, select it and drag it to the area of the screen you wish to target.

kA1G00000008u7MKAQ_en_US_1_5
 
The hotspot can be resized as needed.
 
7.  Select the Properties button on the hotspot.  You can change the label of the hotspot by selecting in the Label text box and typing the new label. 

kA1G00000008u7MKAQ_en_US_1_6
 
Note: Do not worry about the Message. Hotspots will not speak a message without assigning the appropriate action.

kA1G00000008u7MKAQ_en_US_1_7
 It is recommended that you do not edit the actions on any of the hotspots.
 
8.  For this hotspot to be visible when editing, it must be unhidden.Select the Misc tab on the properties panel. Clear the Hidden check box.

kA1G00000008u7MKAQ_en_US_1_8

9.  To edit messages associated with this hotspot, you will need to select the tab that corresponds with that hotspot. We used Subtopic 1 in the example, so we will edit content in the tab labeled Subtopic 1.Select the Subtopic 1tab. (You will know it is selected when the tab turns from gray to yellow.)

kA1G00000008u7MKAQ_en_US_1_9

10.  Select the Properties button at the top left corner of the tab.

kA1G00000008u7MKAQ_en_US_1_10

11. Select the text box next to Label, and enter a label that matches the one you used for your new hotspot.

kA1G00000008u7MKAQ_en_US_1_11

12.  Select the vocabulary grid.

kA1G00000008u7MKAQ_en_US_1_12

13.  Select the Properties button at the top left corner of the grid.

kA1G00000008u7MKAQ_en_US_1_13

14. Select the blue Edit Vocabulary button.

kA1G00000008u7MKAQ_en_US_1_14

15. Select New Message.

kA1G00000008u7MKAQ_en_US_1_15
16.   Type the message that you wish to appear in that button.

kA1G00000008u7MKAQ_en_US_1_16
In this case we have added “What class do we have next?”  (We chose a question to maintain the format in all the other vocabulary grids.)
 

17. Select Save.

18. To add more vocabulary, select the Manage button at the top right corner of the screen.

kA1G00000008u7MKAQ_en_US_1_17
19. Select New Item.

kA1G00000008u7MKAQ_en_US_1_18

20. Enter a label, symbol, and message for the new vocabulary message.

kA1G00000008u7MKAQ_en_US_1_19
kA1G00000008u7MKAQ_en_US_1_20  It is strongly recommended that you follow the preset configuration of communicative intents when adding vocabulary messages.

21.  Select Save.

22.  Select Done.

23.  Select Back.

24.  After you have completed editing, Select Exitand then Yesto save.

kA1G00000008u7MKAQ_en_US_1_21  Did you make a mistake?  Just select Edit from the toolbar.  You can Undo, Redo, Delete, Cut, Copy, or even Duplicate a button.

kA1G00000008u7MKAQ_en_US_1_22

If you've made several changes, but want to revert back to the original copy of the page, select File from the toolbar, and then select Revert.