CUSTOMIZE WITH SHOGUN
Skip to Main Content

Programming a button to record and play a sound in Compass.

juli 27, 2016

  1. Select the Modifybutton and then the button you wish to modify.
  2. Place a label and symbol on the button.
kA1G0000000A1VNKA0_en_US_1_0
      3.  Select the Actionsarea and search for the RecordSound(name, seconds) action.

kA1G0000000A1VNKA0_en_US_1_1

      4.  You must enter a name for your recording. IMPORTANT…You must put quotes around the name you choose.  Example…”daily recording”. After putting in a name, place a number for how many seconds you want the recording to last.

kA1G0000000A1VNKA0_en_US_1_2

     5.  Select the green Done button.

Part 2. Program a button to play a recording
 
  1. Select the Modifybutton and then the button you wish to modify.
  2. Place a label and symbol on the button.

kA1G0000000A1VNKA0_en_US_1_3

     3.   Select the Actionsarea and search for the PlayRecording(name) action.

kA1G0000000A1VNKA0_en_US_1_4
       4.   You will need to enter the name of the recording you wish to play. In part 1, we used the recording name “daily recording”.  IMPORTANT…You must use quotes around the name of the recording.

kA1G0000000A1VNKA0_en_US_1_5
    5.   Select the green Done button to exit.